TRACECO-T self-regulating heating cable 30 W/m | For pipeline frost protection (-25°C to +65°C) | Aluminium + thermoplastic sheath | 25 m/pack

We also recommend the following product as an accessory

• Details
• Data
• Reviews
• User guide

Details

Detailed Description: 

The self-regulating technology allows the cable's power output to automatically adjust to temperature changes: increasing in cold conditions and decreasing in warmer environments. This ensures efficient and safe operation.
Its parallel construction enables on-site cutting to the required length, allowing precise adaptation to specific applications.
Widely used in various industrial and residential heating solutions:

• Freeze protection for drinking water, wastewater, and industrial pipelines
• Heat maintenance for transported liquids (e.g., chemicals, oils) in industrial and agricultural facilities
• De-icing of gutters and drains
• Heat maintenance for large storage tanks in industrial plants
• Heating of fuel and chemical tanks to reduce viscosity
• Protection of outdoor taps, water meters, and small pipes during cold months
• Protection of solar collector and heat pump pipes

Technical Specifications:

• Construction: Aluminium + thermoplastic sheath
• Insulation: Black thermoplastic outer sheath
• Voltage: 230 V
• Power Output: 30 W/m
• Maximum Operating Temperature (powered): 65°C
• Maximum Operating Temperature (unpowered): 80°C
• Minimum Installation Temperature: -25°C
• Bending Radius: Minimum 25 mm

Operation: 

The TRACECO-T heating cable is an easy-to-install and energy-efficient solution for pipe freeze protection. Thanks to its self-regulating technology, it does not require constant supervision and can be safely used in both indoor and outdoor applications.

Data

Voltage:

230 V

Wattage:

30 W

Type of insulation:

Aluminum + thermoplastic sheath

Operating temperature:

-25°C to +65°C

Weight:

60 g/m

Min. order quantity:

25 m

Selectable quantities:

25 m, 50 m, 75 m, 100 m, ...

Reviews

Be the first to write a review!

Write a review

User guide

Installation Instructions

The heating cable must be placed on the lower part of the pipeline. It is important not to use the cable on pipes that can reach temperatures of up to 65°C. This cable is only suitable for frost protection of metal or plastic pipes. For plastic pipes, it is recommended to first apply an aluminum adhesive tape to the pipe to ensure better heat conduction.

How to select the appropriate cable?

• The selected cable heating length must match the length of the pipe.
• The pipe surface should be clean and dry before securing the cable.
• The cable should be secured with PVC or aluminum adhesive tape. The ELAA-50  type aluminum tape is particularly recommended as it helps distribute heat evenly on plastic pipes.

Thermostat Installation

The thermostat (with black casing) should be attached directly to the pipe.

Insulation and Safety

• The system should be covered with an insulation layer to reduce heat loss and save energy.
• Recommended insulation thickness: minimum 13-19 mm.
• Ensure that the grounding is properly connected, as this guarantees safe operation.

The connector cable contains three wires: phase, neutral, and ground. Make sure that the system is correctly connected to the ground to avoid electrical issues.